TRYING AGAIN ANYBODY???

[grand600]

I need to find a source for 2" flex pipe. The same thing you turbo guys would use at your pipe junctions. Does anyone have a clue where I can get some of this pipe??? I need this so I can do before and after dynos of the JRSC FMIC. If I cant get the pipe( that I have searched online for days now) I won't be able to show the before and after dynos. All I will be able to do is the after install dynos. thanks all. BTW I stoped by freightliner and all they had was 3" or bigger. thanks again

[JRCivic]

Have you tried calling GReddy or HKS ???

[5 Liter Eater]

Are you talking about flex pipe or a silicone coupler that the turbo guys use to connect pipes together.

If you mean a coupler and you need it fast, go to home depot or lowes and get a rubber PVC pipe coupler. Bring a piece of pipe in w/ you to get the right size.

[grand600]

ah yes why didn't I think of the plumbing dept?? I'll try that!!

[waveoff]

Most of my car parts are from Home Depot.

[dbman96]

Two options:

cheap - go to kragen or pep boys and find some 2" ID radiator hose, cut to length and hose clamp

pretty - silicon couplings: http://www.roadraceengineering.com/hoseandclamps.htm

[dbman96]

Only problem is home depot doesn't have anything between 2" and 3"... you can usually MAKE one of them work on 2.25 or 2.5" pipe (find a LOT of this in intercooler piping) but it's not ideal.